Setting the Clock

Upon initial start-up or PC board replacement, if “CLOCK SET” automatically appears in the display, skip steps 1, 2 and 3.

  1. Press and hold the Program button for 5 seconds until “LEVEL 2” displays.

  2. Release the Program button, then press the Program button twice. “CLOCK SET” then “ENTER CODE” displays.

  3. Press Product button 1, Product button 2, and then Product button 3.

    Display shows “CS-1” then “SET” then “MONTH”, with the month flashing.

  4. Press the Up and Down arrow buttons to change the month.

  5. Press the Program button. Display shows “CS-2” then “SET” then “DATE” with the date flashing.

  6. Press the Up and Down arrow buttons to change the date.

  7. Press the Program button. Display shows “CS-3” then “SET” then “YEAR” along with the year flashing.

  8. Press the Up and Down arrow buttons to change the year.

  9. Press the Program button. Display shows “CS-4” then “SET” then “HOUR” shows with the hour and “AM” or “PM” flashing.

  10. Press the Up and Down arrow buttons to change the hour and AM/PM setting.

  11. Press the Program button. Display shows “CS-5” then “SET” then “MINUTE” with the minutes flashing.

  12. Press the Up and Down arrow buttons to change the minutes.

  13. Press the Program button. Display shows “CS-6” then “CLOCK MODE” along with “1.AM/PM”.

  14. “1.AM/PM” is 12 hour time, “2.24-HR” is 24 hour time. Press the Up and Down arrow buttons to change.

  15. Press the Program button. Display shows “CS-7” then “DAYLIGHT SAVINGS ADJ” along with “2.US”.

  16. Press the Up and Down arrow buttons to change to the following:

    1. “1.OFF” = No automatic adjustments for Daylight Savings Time.

    2. “2.US” = Automatically applies United States Daylight Savings Time adjustment. DST activated on the first Sunday in April. DST de-activated on the last Sunday in October.

    3. “3.EURO” = Automatically applies European (CE) Daylight Savings Time adjustment. DST activated on the last Sunday in March. DST de-activated on the last Sunday in October.

Clock Set is now complete. Press and hold the Program button to exit.