Cleaning the Blower and Vents

Burn Risk

To avoid burns, do not move the fryer while containing hot oil.

To ensure proper burner operation, clean the blowers and blower vents twice a year.

  1. Press the main power switch to the off position.

  2. Unplug power cord and turn gas shut-off handle clockwise to turn off the gas, and then disconnect the gas line.

  3. Disconnect cable restraint and then carefully roll the fryer from the hood far enough to get behind the fryer.

    Clean Blower Intake Slots

  4. Using a cloth or paper towel, clean the blower intake slots to ensure sufficient air flow to the blowers.

    Remove Lower Rear Panel

  5. Using a crosshead screwdriver, remove lower, rear panel.

    Clean Blower Openings

  6. Using a cloth or paper towel, clean each blower opening.

  7. Clean the vent slots on the inside of rear panel, and then replace panel.

  8. Reattach the gas line and turn the shut-off handle counter-clockwise to turn on the gas and reconnect the cable restraint to the fryer.

  9. Reattach the plug to electrical receptacle and roll fryer back into place.