Discarding the Oil

Burn Risk

To avoid burns, use PPE when handling filter pan or filter pan lid.

NOTE: BULK OIL DISPOSE? in the Special Program Mode or Set-Up Mode, must to set to FRONT for the Front Dispose System to operate.

Over time oil breaks down and needs replaced. Dispose of the oil by doing one of the following:

  • Drain the oil into the filter pan, and then manually dispose in the bulk oil disposal barrel.
  • Pump the oil into the shuttle, and then manually dispose in the bulk oil disposal barrel.
  1. If you use front bulk disposal, locate disposal shuttle and attach to fryer.
  2. Press and hold the F (Filter) button *FILTER MENU* displays, along with 1.EXPRESS FILTER?.
  3. Press and release the down-arrow button twice until 3.DISPOSE displays.
  4. Press the 1 button, DISPOSE? and YES NO display.
  5. Press the 1 button again, DRAIN VAT? and YES NO display.
  6. Press the 3 button if draining the vat is not desired and skip to step 12. Or continue with steps 7.
  7. Press the 1 button and the filter light flashes, OPEN DRAIN displays.
  8. Pull-out the black drain knob to open the drain, DRAINING displays. Oil drains from vat into the filter pan, and then VAT EMTY and YES NO displays.
  9. Verify that the vat is empty, and then press the 1 button, CLEAR OLD OIL FROM OIL LINES, DISPOSE, DONE displays.
  10. Press and hold the left Timer button for a few seconds to clear old oil. Once cleared, press the right Timer button, CLN VAT COMPLETE and YES NO displays.
  11. Scrub the vat and ensure weld seams have all debris removed. Once the vat is clean, press the 1 button.
  12. Press the 1 button, DISPOSE and DONE displays.

    13. NOTE: The pump motor will not run until this step.

  13. Press and hold the left Timer button and oil pumps into shuttle.
  14. Once the oil is no longer pumping from filter pan, press right Timer button, and the blue filter light flashes and CLOSE DRAIN displays.
  15. Push the black drain knob in to close the drain, MANUAL FILL VAT followed by IS POT FILLED?, along with YES NO display.
  16. Fill the vat to the lower indicator line on the rear of the vat with room temperature oil. See Filling or Adding Oil.
  17. Press the 1 button and fryer returns to normal operation.