Unpacking

Shock Hazard

To avoid property damage, do not use puncture unit with tools during unpacking.

Heavy Object

Take care when moving the fryer to prevent personal injury. The fryer weighs approximately: 280 lbs (127 kgs)

NOTICE -

Any shipping damage should be noted in the presence of the delivery agent and signed prior to his or her departure. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

NOTICE -

To avoid equipment damage, remove filter pan and JIB/BIB shelf and ATO, before removing unit from pallet.

  1. Carefully cut and remove banding straps.
  2. Lift the main box off the fryer.
  3. Remove the two hex head bolts from the temporary front left leg and remove leg (1) See Figure 1. Save the leg and bolts for re-installation.
  4. Unlatch and remove drain pan from under fryer. Place in a location clear of unpacking area (2). NOTICE: Remove filter pan from under fryer before removing fryer from pallet or damage to unit may result.
  5. Re-install the left front leg (3).
  6. Cut and remove plastic banding strap from around the fryer that is laced through the pallet wood blocking.
  7. Tilt the fryer to one side and knock out the wood blocking on the opposite side (4). This will take two individuals, one for the tilting and second one to remove the wood blocking.
  8. Once the wood blocking is removed, relax fryer on pallet. Carefully push fryer sideways in the direction of the removed wood blocking to clear the second block.
  9. Continue to slowly push fryer in the same sideways direction naking sure the casters are rolling on the pallet deck board surfaces. Do not allow casters to drop between pallet surface spaces. Ease fryer off the pallet edge and clear of pallet.