Cleaning

Only perform this procedure when the unit is cool or severe burns may result.

NOTICE -

To avoid equipment damage, do not clean stainless steel with abrasive tools, abrasive cleaners or corrosive chemicals.

NOTICE -

To avoid component damage, do not use pressurized water or a steam cleaner to clean unit.

NOTICE -

To avoid equipment damage, do not use alcohol or alcohol-based cleaners (such as sanitizers) on the plastic shelves or LED lens covers.

1. Move the POWER switch to the OFF position.

2. Disconnect the electrical supply to the unit.

3. Remove all product from the cabinet.

4. Wipe down each shelf with a damp cloth, soap and water.

   The panels in the base (bottom tier) can be removed for more thorough cleaning. The holes in the center of each panel help in removing the panels.

   NOTICE -

   DO NOT put plastic air diffuser in a dishwasher. The plastic diffuser is NOT dishwasher safe, and damage to the diffuser could result.

    

   

5. Remove the air diffuser assembly in the front of the unit and take to a sink and clean with soap and water. The plastic diffuser can be pushed out of the metal holder for cleaning.

6. Wipe down the exterior of the cabinet with a damp cloth. Avoid getting water in the area of the control panel.

7. Clean the side glass with non-streaking liquid glass cleaner and a soft cloth..

   To prevent fire, do not allow foreign objects to enter the air duct and DO NOT operate unit without diffuser in place.

   

8. Replace diffuser properly into unit. Looking at the under-side of the diffuser assembly, the plastic diffuser must go towards the inside of the unit.

9. Allow the unit to thoroughly dry before adding more product.