Components

This section provides explanations of all controls, along with operating procedures and daily maintenance. To access the controls, the bottom, front panel must be removed by pulling out on one corner of the panel and unsnapping it from the clips.

Item No.	Description	Function
1	Power switch	A rocker switch that sends electrical current to the operating components and lights when turned on
2	Digital Display	Shows the cabinet temperature, error codes and the selections in the Program Modes
3	Base Shelf	Press to set the base shelf heat value and to toggle through the Program Mode
4	Heat indicator	Lights when the heat is on for that shelf
5	Shelf button	Press and hold to set the shelf heat value. The bold line indicates the shelf being preset. The number of shelf buttons depends on the number of shelves in the unit. The decal for a EPC 200 is shown.
6	Up and Down arrow buttons	Used to set the heat values of the shelves and base; press and hold, while turning on power switch to enter the Special Program Mode; used in Special Program Mode to turn off and on heat outputs.