Unpacking

The Henny Penny Heated Holding Cabinet has been tested, inspected, and expertly packed to ensure arrival at its destination in the best possible condition.The cabinet is packed inside a triple wall carton with sufficient packing material to withstand normal handling in shipment. The carton is also strapped onto a wooden base.

NOTICE -

Any shipping damage should be noted in the presence of the delivery agent and signed prior to his or her departure. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Removing from Carton

  1. Cut the bands holding the wooden base to the carton.

  2. Lift carton off the unit.

  3. Remove unit from the wooden base.

  4. Remove all packing material from around cabinet and inside drawers.

  5. Remove the top drawer and basket.

  6. Remove the water pan by supporting it with one hand and pulling the latches towards you, with the other hand. The water pan drops down from the cabinet ceiling.

  7. Install the four baffles in the slots in the water pan.

  8. Reinstall the water pan by aligning the studs in the ceiling with the holes in the water pan flanges, holding the pan flush against the ceiling, and pushing the latches towards the rear of the cabinet.

  9. Replace drawer and basket.

  10. Peel off all protective covering from the exterior of the cabinet.