Components

Item No.	Controls	Description
1	Power Switch	A toggle switch that switches electrical current to the unit.
2	Power Indicator	Illuminates when the power switch is in the ON position and the components are energized.
3	Thermometer	Indicates the air temperature inside the cabinet.
4	Heat Indicator	Illuminates when the thermostat turns on the heaters.
5	Thermostat	An electromechanical device that controls the temperature inside the cabinet.
6	Blower Motor	Used to recirculate the hot humid air throughout the cabinet; there are two blower motor assemblies in the cabinets.
7	Heater	Two, open-resistance, wire type heaters that provide heat throughout the cabinet; a standard full sized 120 VAC unit will have 1000 watt heaters; a standard full sized 240 VAC unit will have 1500 watt heaters; a standard 120V, HHC-903 unit will have 750 watt heaters.
8	High Limit	A safety device mounted next to the heater which protects the unit from overheating.
9	Fuse	A protective device that breaks the circuit when current exceeds the rated value; the fuse provides an overload protection for the electrical components; to remove the fuse, twist and pull the cap; the fuse is used only on the 120V/2000 watt units.
10	Water pan	Holds the water for creating humidity in the cabinet.
11	Venting System (Units with vent adjustment only)	Controls the humidity levels in the cabinet.