Special Programming

SP-1 Fahrenheit/Celsius

1. Press and hold the PROG button until “LEVEL 2”, then “CLOCK SET” displays.
2. Press the PROG button. “SP PROG” displays.

   After 5 seconds, “ENTER CODE” displays.

3. Press hidden buttons: 1,2, 3.

   “SP-1, TEMP, UNITS” and “°F” or “°C” displays.

4. Press the Up arrow button or Down arrow button to change temperature units.

SP-2 Lock/Unlock

1. Press and hold the PROG button until “LEVEL 2”, then “CLOCK SET” displays.
2. Press the PROG button. “SP-2, LOCK/UNLOCK PROGRAMMING” and “LOCK” or “UNLOCK” displays.
3. Press the Up arrow button or Down arrow button to lock or unlock the programming.

SP-3 Air Temperature Setpoint

1. Press and hold the PROG button until “LEVEL 2”, then “CLOCK SET” displays.
2. Press the PROG button. “SP-3, AIR TEMP SET POINT,” and the preset cabinet temperature displays.
3. Press the Up arrow button or Down arrow button to change the air temperature setpoint. 140° F (60° C) minimum, 210° F (99° C) maximum.

SP-4 Humidity Setpoint or Off

1. Press and hold the PROG button until “LEVEL 2”, then “CLOCK SET” displays.
2. Press the PROG button. “SP-4, HUMIDITY SET POINT,” and the preset humidity setpoint displays.
3. Press the Up arrow button or Down arrow button to change the humidity setpoint from 10% to 90% or to turn the humidity system OFF.

SP-5 Proof Air Temperature Setpoint

1. Press and hold the PROG button until “LEVEL 2”, then “CLOCK SET” displays.

2. Use up or down button to change the proofing temperature, 80° F (27° C) minimum, 140° F (60° C) maximum.

SP-6 Proof Humidity Setpoint

1. Press and hold the PROG button until “LEVEL 2”, then “CLOCK SET” displays.

2. Press program and “SP-6, PROOF HUMIDITY SETPOINT,” and the preset proofing humidity shows in display.

3. Use up or down button to change the proofing humidity, 10 to 90%.

SP-7 Out of Water Trip Point

1. Press and hold the PROG button until “LEVEL 2”, then “CLOCK SET” displays.
2. Press program and “SP-7, OUT OF WATER TRIP POINT” and the preset trip point temperature shows in display. If the float switch fails, the trip point temperature is the water pan temperature at which the control senses the water pan is out of water.We recommend a trip point temperature of 450° F (232° C).

3. Use up or down button to change the out-of-water trip point.

SP-8 Clean Water Pan Setpoint

1. Press and hold the PROG button until “LEVEL 2”, then “CLOCK SET” displays.
2. Press program and “SP-8, CLEAN WATER PAN SETPOINT,” and the preset temperature, at which the controls senses that the water pan needs cleaned of lime, shows in the display. We recommend a setpoint temperature of 425° F (218° C).

3. Use up or down button to change the setpoint.

SP-9 System Initialization (Factory Settings)

1. Press and hold the PROG button until “LEVEL 2”, then “CLOCK SET” displays.

2. Press program and “SP-9, DO SYSTEM INIT” displays.

3. Press and hold the down button until the display counts down from 3, and the display flashes “-INIT-,” then “INIT*DONE”. This completes the initialization, and sets the control to factory settings.

SP-10 Audio Volume

1. Press and hold the PROG button until “LEVEL 2”, then “CLOCK SET” displays.
2. Press program and “SP-10, AUDIO VOLUME,” and the volume setting (1 to 10) displays. Press 1 to test volume.

3. Use up or down button to change the volume.

SP-11 Audio Tone

1. Press and hold the PROG button until “LEVEL 2”, then “CLOCK SET” displays.

2. Press program and “SP-11, AUDIO TONE -(Hz)-” and the tone setting (50 to 2000) displays.

3. Press up or down button to change the tone setting.

SP-12 Audio Effects

1. Press and hold the PROG button until “LEVEL 2”, then “CLOCK SET” displays.

2. Press program and “SP-12, AUDIO EFFECT” and the effect

   setting (0 to 3) displays.

3. Use the up or down button to change the pattern of the tone.

SP-13 Language Options

1. Press and hold the PROG button until “LEVEL 2”, then “CLOCK SET” displays.

2. Press program and “SP-13, LANGUAGE,” and the preset language

   displays.

3. Use the up or down button to change to English, French, German, Spanish, or Portuguese.