Search Tips
Symbols Guide
The symbols below may be used on the unit or contained within the online or print documentation.
|
Symbol |
Reference No. |
Symbol Title |
Description |
|---|---|---|---|
|
|
ISO 7000-0434A |
Caution |
Indicates that caution is necessary when operating the device or control close to where the symbol is placed or that the current situation needs operator awareness or operator action in order to avoid undesirable consequences. |
|
Shock Hazard Symbol | Caution, risk of electric shock | Identifies equipment, for example the power source, that has risk of electric shock. |
|
ISO 7000-0535 | Caution, hot surface | To indicate that the marked item can be hot and should not be touched without taking care. |
|
ANSI | Hot surface | To indicate that the marked item can be hot and should not be touched without taking care. |
|
ISO 7000-0790 | Read Operator's manual | Indicates the operator's manual or card should be read before operating. |
|
ISO 7000-1641 | Operator's manual; operating procedures | Identifies the location where the operator's manual is stored or to identify information that relates to the operating instructions. Indicates that the operating instructions should be considered when operating the device or control close to where the symbol is placed. |
|
ISO 7010-P003 | No open flame; Fire, open ignition source and smoking prohibited | To prohibit smoking and all forms of open flame |
|
|
ANSI |
Heavy object |
Indicates the object is heavy and requires mechanical assistance or multiple persons lifting. |
|
|
ISO 7010-W021 |
Flammable material |
To warn of flammable material. |
|
N/A | Hot water | To warn of hot water. |
|
|
N/A |
Do not Heat Temperature Probe |
Do not apply direct heat to the temperature probe. |
|
|
N/A |
Ground unit |
To warn of electrical shock if unit is not properly grounded. |
|
|
European Union directives |
CE |
Product complies with the requirements of the applicable European Union directives. |
|
|
CSA Certification |
CSA |
This product complies with standards of CSA certification in United States and Canada. |
|
|
WEEE directive |
RoHS compliant |
As of August 16, 2005, the Waste Electrical and Electronic Equipment directive went into effect for the European Union. Our products have been evaluated to the WEEE directive. We have also reviewed our products to determine if they comply with the Restriction of Hazardous Substances directive (RoHS) and have redesigned our products as needed in order to comply. To continue compliance with these directives, this unit must not be disposed as unsorted municipal waste. For proper disposal, please contact your nearest Henny Penny distributor. |
