Testing

  1. Press and hold the two (2) end timer buttons at the same time for 2 seconds until the middle display reads “TEST”.

  2. The left display will read “DISP”and will light green. The right display will read “BACK” and will light red. Press the timer button next to “DISP” to continue with test. Press the timer button next to “BACK” to exit test.

  3. Using the middle timer button, select what area of the display to test and then press the timer button next to “TEST” to run test.

    • 1- All display digits

    • 2- Digit sections- Press any timer button at any time during the test to exit and return to the “TEST” display

    • 3- Color Ring (The middle display will read“CLR”)- To exit test 3, press the timer button next to “EXIT”

  4. Once test is complete, press the timer button next to “BACK” three (3) times to exit to idle mode.