Operating the ODS 460 with OFX 51X or LVX 30X Model Fryer

To avoid severe burns and equipment damage:

  • Use PPE.

  • Ensure filter pain is empty prior to removing from unit.

To avoid personal injury:

  • Use PPE

  • Do not overfill the oil disposal shuttle.

The ODS holds approximately half the volume of oil contained in the vat. To prevent splashing and spillage, drain no more than half of the oil in to the ODS at one time.

Burn Risk

To avoid burns, use PPE when connecting to or disconnecting from oil disposal unit.

To avoid personal injury, ensure cover is in place before moving shuttle.

Draining Oil from an OFX 51X or LVX 30X Model Fryer

  1. Ensure the shuttle's front sensor contactor is adjusted accordingly.

  2. Remove the filter pan assembly from under the fryer.

  3. Release the cover latch and hinge cover back on oil disposal shuttle. Make sure crumb catcher is in place as shown.

  4. When making multiple disposal trips, ensure the shuttle is completely empty to prevent splashing.

    If it is not empty, refer to Disposing Oil into Disposal Container.

  5. Roll the oil disposal shuttle under the fryer until it stops. Make sure the fryer’s drain aligns with opening in shuttle.

  6. Perform Disposing Oil from an OFX 51X or LVX 30X Model Fryer.

Disposing Oil from an OFX 51X or LVX 30X Model Fryer

  1. Navigate to Settings > Oil & Filter > Dispose Oil.

  2. Type the password 1122, and then tap Cart dispose option.

  3. Tap Next, and then tap Drain. The Complete screen displays.

  4. Tap Complete when oil shuttle is full.

  5. Tap Next, and then continue at Disposing of Oil into Disposal Container. DO NOT press Purge at this time.

  6. Tap Repeat, and repeat steps 3 through 5 until all stale oil is drained from vat.

  7. Tap and hold Purge, until clean oil begins pumping into vat.

  8. Wait for all the oil in the vat to drain into the oil shuttle, and then wipe out the vat with a clean towel.

  9. Tap Next, and then tap Fill.

  10. Remove oil shuttle, replace Filter Pan, and then tap Done.

  11. Continue by filling the vat with fresh oil.