Replacing the O-ring Quarterly

Burn Risk

To avoid burns, use PPE when handling filter pan or filter pan lid.

To prevent oil leaking and to keep filtering process operating properly, replace the filter pan and filter screen O-rings every three months.

Replacing Filter Pan O-rings

  1. Pull out the filter pan assembly using the handle on the filter pan.

  2. Use a small flat-bladed screwdriver to pry up on each O-ring and pull off the end of tube.

  3. Lubricate new O-rings on filter tube with fresh, cold oil.

  4. Roll new O-ring into notch on tube.

  5. Push filter pan back into position.

Replacing Filter Screen O-rings

  1. Unlatch and pull out the filter pan assembly using the handle on the filter pan and remove the lid.

  2. Remove the contents from the filter pan to access the filter screen.

  3. Use a small flat-bladed screwdriver to pry up on each O-ring and pull off the end of tube.

  4. Lubricate new O-rings on filter tube with fresh, cold oil.

  5. Roll new O-rings in to the notch on tube.

  6. Reassemble contents from the filter pan.

  7. Push filter pan back into position, making sure latch engages.