Special Programming

The Special Programming menu allows for setting up display functions such as language, temperature unit, audio volume, etc.

NOTE: Program mode no longer resets the product settings and cook menus to default values.

Access the Special Programming menu by doing the following:

  1. Press and hold the P button until *MAIN* displays.

  2. Press the P button again.
  3. Select 4. PROG.
  4. Select 3. SPCL PROG. The Special Program menu displays. Enter code 1-2-3.
  5. Use the left or right arrow to navigate through the options.

Menu

Display Name

Function

SP-1

TEMP UNIT

Press the plus or minus button to select either FAHRENHEIT ( F) or CELSIUS ( C).

SP-2

LANGUAGE

Press the plus or minus button to scroll through a list of languages. Press a language to select.

SP-3

SYSTEM INIT

Press the hold-> button for three seconds to reset the controls to factory defaults.

SP-4

AUDIO VOLUME (Loudness)

Press the plus or minus button to adjust the volume (loudness) of the speaker between 1-10, then press the TEST button to test the loudness.
SP-5 AUDIO TONE (Frequency) Press the plus or minus button to adjust the frequency (tone) setting, then press the TEST button to test the tone.
SP-6 AUTO-IDLE MINUTES If the drop temperature is reached but no cook cycle is started, select that after X minutes the control will automatically return to a specified cook menu.
SP-7 IDLE TEMPERATURE Press the plus or minus button to increase or decrease the Idle mode regulating temperature.
SP-8 BULK OIL DISPOSE?

Press the plus or minus button to select one of three options:

  • NONE - Dispose by draining into a disposal cart or shuttle.
  • REAR HOSE - Dispose by pumping through the rear permanent hose connected to the fryer, which goes to a waste tank.
  • FRONT HOSE - Dispose by pumping through the front hose connection, which empties into a portable disposal tank.

SP-9

BULK OIL SUPPLY?

Press either 1. NO or 2. YES to indicate if a bulk oil supply is available for refilling the ATO oil tank and vat with fresh oil.
SP-10 CHANGE MGR CODE Provides access to change the Manager password code, which is defaulted to 123 from the factory. The manager password code is used to access modes such as Product, Cook, Special Programming, etc.
SP-11 MELT CYCLE This setting should always be set to LIQUID (liquid cooking oil).