Special Programming

Starting with v1.60, initializing operations performed in Special Programming.

NOTE: Program mode no longer reset the product settings and cook menus to default values.

Access the Special Programming menu by doing the following:

  1. Press and hold the menu button until *MAIN* displays.

  2. Press the menu button again.
  3. Select 4. PROG.
  4. Type 123. The 3. SPCL PROG menu displays.
  5. Select 3. SPCL PROG. The Special Program menu displays.
  6. Use the left or right arrow to navigate through the options.

Menu

Display Name

Function

SP-1

TEMP UNIT

Press the plus or minus button to select either FAH- RENHEIT ( F) or CELSIUS ( C).

SP-2

LANGUAGE

Press the plus or minus button to scroll through a list of languages. Press a language to select. NOTE: Sup- ports the Russian language for v1.60 or higher.

SP-3

SYSTEM INIT

Press the hold-> button for three seconds to reset the controls to factory defaults.
SP-4 OPS/QPM SYSTEM ENABLED? Press the plus or minus buttons to enable or disable the OPS or QPM wireless communications for this con- trol. Requires an optional radio module.

SP-4A

OPS/QPM USE COOK ID CODE

Press the plus or minus button to select:

SP-5

AUDIO VOLUME (Loudness)

Press the plus or minus button to adjust the volume (loudness) of the speaker between 1-10, then press the TEST button to test the loudness.

SP-6

AUDIO TONE (Frequency)

Press the plus or minus button to adjust the frequency (tone) setting, then press the TEST button to test the tone.

SP-7

MELT CYCLE

Press the plus or minus button to select either the SO- LID or LIQUID melt mode heating cycle.

SP-8

START-UP POLISH ENABLED?

Press the plus or minus button to select either YES or NO to specify whether an automatic polish operation should be performed as part of the normal morning Start-Up process.
SP-11 COOK MENUS OPTIONS Press the plus or minus button to select:
  • SELECT - to begin preheating when a cook menu button is pressed.
  • COOK - to begin the cook cycle immediately.

SP-12

COOK DONE GO

WHERE?

Press the plus or minus button to select the default cook menu to display after each cook cycle completes.

SP-13

AUTO-MENU MINUTES

Press the plus or minus button to select a time in minutes. When a selected product begins preheating, and the drop temperature is reached but a cook cycle is not started, after X minutes the control automatically returns to a cook menu.

SP-14

AUTO-MENU GO WHERE?

If Auto-Menu feature is enabled, press the plus or minus button to select a default cook menu that displays after the timer times out.
SP-15 COOL TEMP Press the plus or minus button to select a global cool temperature setting.

SP-16

PROD PROG ENTER ALL TIMES FIRST?

Press the plus or minus button to select:

  • YES - to step through all the times first, then all temps and then all pressures.
  • NO - to step through Time1, Temp1, Pressure1 and then Time2, Temp2, Pressure2, etc.
SP-17 BULK OIL DISPOSE?

Press the plus or minus button to select one of three options:

  • NONE - Dispose by draining into a disposal cart or shuttle.
  • REAR HOSE - Dispose by pumping through the rear plumbing connection.
  • FRONT HOSE - Dispose by pumping through the front hose connection by pressing and holding the button.

    • NOTE: The optional front hose kit must be installed and enabled by a field technician or at the factory in Tech Mode screen T-4A before it displays in Special Programming SP-17.