Filling the Fresh Oil Tank

The fresh oil tank automatically tops off the oil in the vat when it senses the vat oil level is low. Operators should add new oil to the fresh oil tank as needed. Do not add new oil directly to the vat unless performing an oil disposal cycle. Refer to Oil Disposal for oil disposal steps.

After three failed attempts to fill the vat from the fresh oil tank, the fill oil tank message displays:

  • The upper display reads FILL OIL TANK.

  • The middle display flashes, representing the location of the tank.

  1. Fill the fresh oil tank by doing the following:

  2. Pull out the fresh oil tank.

  3. Open the fresh oil tank lid and locate the marks on the inside wall of the tank.

  4. Open the fresh oil tank lid.

  5. Using new oil, fill the fresh oil tank to the marks on the inside of the tank.

  6. Shut the fresh oil tank lid, and then slide back into position.

  7. Press the OK button on the control panel.