Optional Direct Connect System

Burn Risk

To avoid injury, use PPE when turning diverter-handle.

The hose is to be attached to oil return line only for the system to work properly.
  1. In the back of the fryer, connect the hose with female quick disconnect to the male quick disconnect at the wall.

    2. NOTE: Once attached, the hose can remain connected unless the open fryer is moved.

  2. Open the drain valve and drop the oil from the desired vat into the filter drain pan.
  3. From the back of the fryer, pull the diverter-handle towards you from FILTER to DISCARD.

  4. Once all oil is gone from vat, turn the filter pump switch to the ON position. Shortening is pumped from the filter drain pan.
  5. Once all the oil is out of the filter drain pan, turn the filter pump switch to the OFF position.
  6. From the back of the fryer, push the diverter-handle away, from DISCARD to FILTER.
  7. Vat is now ready for fresh oil.