Activating the Function Menu

Follow these steps to activate the Function Menu and select and activate a programming mode.

  1. With the fryer -OFF-, or on but not cooking, press and hold the Function button for about 1 second, until “REG PROGRM” displays, and then release the button.
  2. Press and release the Function button repeatedly as needed, to step through the available options.

Note: A double beep sounds if you circle around to the first item again. The Exit Cool button can be used to step backwards through the list.

Item

Description

REG PROGRM

Program the product cook settings.

REVIEW USE*

Review Daily and Total cook counts.

RESET USE

Review Daily and Total counts with option to reset.

FAC PRESET

Configuration settings, like °F/°C, Speaker Volume, etc.

TECH I-O

Test inputs and outputs, check probe readings, etc.

APPL TEST*

Check the results of current or recent Appliance Test.

HEAT CNTRL

Set parameters for heat control algorithms.

PLSH ENABL

Polish Enable: Enable the forced Polish feature.

POLISH PRG

Set parameters related to Polish features.

CLOCK SET

Set the control’s real time clock date and time values.

USB / DATA

Print Report, Get/Save settings to USB, etc.

*Note: By default, these two steps do not require a password.

If you pause for 2 seconds on any step that doesn’t require a password -- like the “Review Use” or “Appliance Test” options -- that program mode automatically activates. To select a different mode you will have to exit and start over. Otherwise, if you pause for 2 seconds on a step that requires a password, the display changes to “CODE”. If this is the step you want, enter the password for it using the number buttons 1..10.

If you want a different step, press the Function button again to resume stepping through the options. Exit at any time without activating a programming mode by pressing and holding the Function button. The control exits automatically if no buttons are pressed for about 15 seconds.