(missing or bad snippet)

Symbols Guide

The symbols below may be used on the unit or contained within the online or print documentation.

Symbol

Reference No.

Symbol Title

Description

ISO Caution icon

ISO 7000-0434A

Caution

Indicates that caution is necessary when operating the device or control close to where the symbol is placed or that the current situation needs operator awareness or operator action in order to avoid undesirable consequences.

Shock Hazard IconShock Hazard SymbolCaution, risk of electric shockIdentifies equipment, for example the power source, that has risk of electric shock.
ISO Caution Hot Surface IconISO 7000-0535Caution, hot surfaceTo indicate that the marked item can be hot and should not be touched without taking care.
ANSIHot surfaceTo indicate that the marked item can be hot and should not be touched without taking care.
ISO 7000-0790Read Operator's manualIndicates the operator's manual or card should be read before operating.
ISO 7000-1641Operator's manual; operating proceduresIdentifies the location where the operator's manual is stored or to identify information that relates to the operating instructions. Indicates that the operating instructions should be considered when operating the device or control close to where the symbol is placed.
ISO 7010-P003 No open flame; Fire, open ignition source and smoking prohibited To prohibit smoking and all forms of open flame

ANSI

Heavy object

Indicates the object is heavy and requires mechanical assistance or multiple persons lifting.

ISO 7010-W021

Flammable material

To warn of flammable material.

N/AHot waterTo warn of hot water.

N/A

Do not Heat Temperature Probe

Do not apply direct heat to the temperature probe.

N/A

Ground unit

To warn of electrical shock if unit is not properly grounded.

CE icon

European Union directives

CE

Product complies with the requirements of the applicable European Union directives.

CSA icon

CSA Certification

CSA

This product complies with standards of CSA certification in United States and Canada.

WEEE RoHS icon

WEEE directive

RoHS compliant

As of August 16, 2005, the Waste Electrical and Electronic Equipment directive went into effect for the European Union. Our products have been evaluated to the WEEE directive. We have also reviewed our products to determine if they comply with the Restriction of Hazardous Substances directive (RoHS) and have redesigned our products as needed in order to comply. To continue compliance with these directives, this unit must not be disposed as unsorted municipal waste. For proper disposal, please contact your nearest Henny Penny distributor.

(missing or bad snippet)