Search Tips
C1000 Control
|
Item No. |
Description |
Function |
|---|---|---|
|
1 |
Digital Display |
Shows the oil temperature, the timer countdown in the Cook Cycle and the selections in the Program Mode. - The temperature of the oil can be shown by pressing the program button once or twice to view set-point temperature. - If oil temperature exceeds 425° F (218° C) the display reads “E-5, FRYER TOO HOT”. |
|
2 |
Ready LED |
This LED lights when the oil temperature is within 5 percent of the setpoint temperature, signaling the operator that the oil temperature is now at the proper temperature for dropping product into the vat. |
|
3 |
Timer Button |
The timer buttons are used to start and stop Cook Cycles. |
|
4 |
Idle Button |
The idle buttons are used to start an Idle Mode which reduces the temperature of the oil during non-use periods. Press and hold to exit the Idle Mode. |
|
5 |
Program Button |
The program button is used to access the Program Modes. Once in the Program Mode it is used to advance to the next parameter. |
|
6, 7 |
Left Up-Down Arrow |
Used to adjust the value of the currently displayed setting in the Program Mode and to change set-point temperature. |
|
8, 9 |
Right Up-Down Arrow |
Used to adjust the value of the currently displayed setting in the Program Mode and to change set-point temperature. |
