Clock Set

Upon initial start-up, or PC board replacement, if “CLOCK SET” automatically appears in the display, start with step 4.

  1. Press and hold right Program button for 5 seconds until “LEVEL 2” shows in display.

  2. Press right Program button and “CLOCK SET”, “ENTER CODE” shows in display.

  3. Press 1,2, 3 product buttons.

    “CS-1, SET, MONTH”, and the month flashes in the display.

  4. Press the Up and Down arrow buttons  to change the month.

  5. Press right Program button and “CS-2, SET, DATE” displays, with the date flashing.

  6. Press  Up and Down arrow buttons to change the date.

  7. Press right Program button and “CS-3, SET, YEAR” displays, along with the year flashing.

  8. Press  Up and Down arrow buttons to change the year.

  9. Press right Program button and “CS-4, SET, HOUR” displays, with the hour and “AM” or “PM” flashing.

  10. Press Up and Down arrow buttons to change the hour and AM/PM setting.

  11. Press right Program button and “CS-5, SET, MINUTE” displays, with the minutes flashing.

  12. Press Up and Down arrow buttons to change the minutes.

  13. Press right Program button and “CS-6, CLOCK MODE” displays, along with “1.AM/PM”.

  14. “1.AM/PM” is 12 hour time, “2.24-HR” is 24 hour time. Press Up and Down arrow buttons to change.

  15. Press right Program button and “CS-7, DAYLIGHT SAVINGS ADJ” displays, along with “2.US”.

  16. Press Up and Down arrow buttons to change to the following:

    1. “1.OFF” = No automatic adjustments for daylight savings time.

    2. “2.US” = Automatically applies United States daylight savings time adjustment. DST activated on the first Sunday in April. DST de-activated on the last Sunday in October.

    3. “3.EURO” = Automatically applies European (CE) daylight saving time adjustment. DST activated on the last Sunday in March. DST de-activated on the last Sunday in October.

  17. Press right Program button and “CS-8, BEGIN NEW DAY” shows in display, along with “3:00AM”.

    This setting indicates the time of day that statistics start accumulating for a new day. If set to 3:00AM, for example, then late night cook cycles and filter operations from midnight to 3:00AM Tuesday morning, are accumulated with Monday’s statistics.

    The CS-8 value can be set from 12:00AM (midnight) to 8:00AM,  in  half  hour  increments  (12:00  AM, 12:30 AM, 1:00 AM, 1:30 AM, etc.). The default value for general market software is 3:00 AM.

  18. Press Up and Down arrow buttons to change the time the “new” day starts.

Clock Set is now complete. Press and hold right Program button to exit.