CFA Operating Components

Controls and Indicators

Item No.

Description

Function

1

Heat On LED

Oil heats when illuminated.

2

Digital Display

Displays functions of the cook cycle, Program Mode, Diagnostic Mode and alarms.
3 Wait LED Flashes when the oil is either too cool or too hot to drop product.
4

Ready LED

Illuminates when oil temperature is 5°F below set point to 15° F above set point, signaling product can now be cooked.
5 Info Button Press to display current fryer information and status; if pressed in the Program Mode, it shows previous settings. Pressing this along with the program button accesses the In- formation Mode which has historic information on the Opera- tor and fryer performance.

6

Filter Button

Used to access the Filter Menu; also used for up or down buttons.
7 Program Button Press to access Program Mode. Program Mode is used to access settings. If pressed along with the info button, it accesses the Information Mode which has historic information on the Operator and fryer performance. It also allows access to the English-Spanish settings, diagnostics, Clean-Out Mode, and Manual Mode, if pressed before the appropriate button.
8

Timer Button

Used to stop cook cycles and to stop the timer at the end of the Hold cook cycle. It is also used to program a Manual Program for nonstandard products.
9 Menu Card Shows name of food product selected. The menu strip is located behind the decal.
10 Product Select Button

Press to select food products to be cooked, as well as answering Display prompts. If you press the program button before selecting a product selection number:

  • 4 accesses the diagnostics
  • 5 accesses the Clean-Out Mode
  • 6 toggles between English-Spanish display
11

Filter Light

A filter light is found beside each black drain knob. When the light is solid blue, the oil requires filtering. When this indicator is flashing, the drain requires opening or closing.
12 Power Switch When the power switch is turned to the on position, power is supplied to the controls and pumps.

Fryer Components

Item No.

Description

Function

1

Vat Cover

Covers the vat when not in use.

2

USB Port

Used to download information from controls and perform firmware updates.
3 Drain Valve Knob Pull out black knob to open drain valve and oil drains from vat; Push in to close drain valve and oil can be pumped into vat.
4

Reserve Oil Tank

Used to hold new oil for the automatic oil top-off feature.
5 Filter Drain Pan Assembly Oil is drained into this pan and then is pumped through the filter to help prolong the use of the oil.

6

Quick Disconnect

Connection for rinse hose when disposing oil.

Info: This connection is only used when disposing oil.

7* Basket

Each vat accommodates two 1/2 baskets or one full-size nugget or tiered basket.

* = Not Shown