Weekly Cleaning

Stand pipe could be hot! Allow to cool before removing or burns could result.

To avoid burns, use PPE when removing concentration ring.

NOTICE -

To avoid damage to the unit, delime the unit weekly.

  1. Turn off controls and water and remove pans and racks from cabinet.

    Standpipe Removal

  2. Allow unit and water to cool, then pull stand pipe out of drain hole to empty water pan.

    Concentration Ring

  3. Remove concentration ring assembly from water pan.

  4. Liberally spray the water pan with a concentrated deliming agent and let stand for 10 minutes.

  5. Scrub the pan with a brush and flush with water.

  6. Reinstall concentration ring assembly in the water pan.

    NOTICE -

    Ensure you install the racks correctly. Installing the lower racks in the upper rack location will lead to holding problems. The lower racks are shown below.

    Lower holding rack

  7. Reinstall the racks and fill the water pan with water to the maximum water fill line.

    Unit is ready for use.