Error Codes

Display Cause Solution

“E-4 CPU TOO HOT”

Control board too hot; unit overheating or louvers clogged

Turn switch to OFF position, then back to ON; if display still shows “E-4”, the PC board is getting too hot; clean louvers and check cooling fan; if cooling fan is not working, have it replaced; once panel cools down, the controls should return to normal; if “E-4” persists, have the PC board replaced

"E-6B AIR TEMP SENSOR FAILED SHORTED" Faulty air temperature probe Turn switch to OFF position, then back to ON; if the display shows “E-6”, the temperature probe should be checked; once the temperature probe is repaired, or replaced, the controls should return to normal; if “E-6”persists, have PC board replaced
"E-41 SYSTEM DATA LOST" Memory scrambled Turn switch to OFF position, then back to ON; if the display shows “E-41”, the control should be re-initialized (see Programming Section); if “E-41” persists, have PC board replaced

Controls set CE=y means unit does not have a temperature probe and the controls must be set to CE=n in Special Programming.