Cleaning

NOTICE -

To avoid equipment damage, do not clean stainless steel with abrasive tools, abrasive cleaners or corrosive chemicals.

NOTICE -

To avoid component damage, do not use pressurized water or a steam cleaner to clean unit.

1. Turn all controls to the OFF position.

2. Disconnect the electrical supply to the cabinet.

3. Open the doors and remove all trays from the cabinet.

4. Take the trays to a sink and clean them thoroughly.

5. Remove the water pan and clean it with a soft cloth, soap, and water.

6. Wipe the control panel with a damp cloth. Do not splash water around the controls.

7. Clean the exterior of the cabinet with a damp cloth.

   

8. Open the doors and remove side racks. Clean the racks with soap and water.

9. Clean the interior of the cabinet thoroughly with a cloth and soap water.

10. Put the side racks and water pan back into the cabinet.

11. Leave at least one door open over night to allow the unit to thoroughly dry out.