Unpacking

The Henny Penny Heated Holding Cabinet has been tested, inspected, and expertly packed to ensure arrival at its destination in the best possible condition. The cabinet rests on cardboard pads that sit on a wooden skid. The racks inside the cabinet are secured with cardboard packing. The unit is then packed inside a heavy cardboard carton with sufficient padding to withstand normal shipping treatment.

NOTICE -

Any shipping damage should be noted in the presence of the delivery agent and signed prior to his or her departure. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard .

Heavy Object

Take care when moving the unit to prevent personal injury. The units weigh approximately 110 lbs (49.9 kgs).

Removing from Carton

  1. Carefully cut banding strips.
  2. Lift carton off the unit.
  3. Lift the unit off the cardboard padding and skid.
  4. Open doors and remove packing from behind racks..
  5. Peel off all protective covering from the exterior of the cabinet.

Selecting a Location

The unit should be placed in an area where the doors can be opened without interruption and loading and unloading of product is easy. For proper operation, the cabinet must be level. The unit MUST be mounted to the table-top, using the 4, 1/4-20 x 1-1/2 inch (38.1 mm) bolts and washers, supplied with the cabinet. Screw the bolts up through the table and into the holes in the base of the unit as shown.