Mounting the Optional Wireway Channel "Chimney"

For units with the electrial supply exiting the top of the module and running to the ceiling of the store, round, stainless steel channels are available to cover and protect the cord.

1. Using a cross-head screwdriver, remove the screws securing the front panel and pull panel down to access the holes in the top of the module.

   

2. Pull the cord through the channel to take the slack out of the cord and then match-up the studs on the channel to the holes in the top of the module and set the channel on the module.

3. Using the 4 nuts, shipped inside the unit, secure the channel to the module top.

   

4. Reattach the front panel.