Mounting the HHC 983 on a Stand

HHC 983 Mounting Plate Locations

  1. Unpack the humidified holding cabinet stand (HHS) and stand upright.

  2. Remove doors from HHC 983 to allow easier lifting.

  3. Lift HHC 983 onto posts of the Humidified Holding Stand (HHS), making sure the locking casters are towards the front of the unit.

  4. Align the holes in the mounting plates with the holes in the HHC 983.

    NOTE: The posts of the HHS can be moved, with some effort, to help align the holes in the mounting plates with the holes in the HHC 983.

    HHS Bolts Secured

  5. Using the bolts and lock-washers provided with the HHS, screw the bolts up under the mounting plates and into the bottom of the HHC 983. Tighten with 7/ 16 inch wrench or socket.

  6. Replace the doors onto HHC 983 and unit is ready for use.