Setting the Clock

  1. Press and hold program for 5 seconds, and LEVEL 2, then (Time-of-day, date, and “CLOCK SET” displays.

  2. After 5 seconds, “ENTER CODE” displays.

  3. Using the hidden buttons enter code 1, 2, 3, and “CS-1, SET, HOUR”, and the time of day (with the hour flashing) displays.

    A total of 5 hidden buttons exit. If the wrong code is entered, “INVALID CODE” scrolls across the display, and the controls automatically exits the Program Mode.

  4. Press the desired timer button (1-15). (More than one can be programmed at one time).

  5. Press the up or down button to change the hours..

  6. Press program and “CS-2, SET, MINUTE” (Continued) displays, with the minutes flashing.

  7. Use up or down button to change the minutes.

  8. Press program and “CS-3, SET, MONTH” displays, along with the date (month flashing).

  9. Use up or down button to change the month.

  10. Press program and “CS-4, SET, DATE” displays with the date flashing.

  11. Use up or down button to change the date.

  12. Press program and “CS-5, SET, YEAR” displays with the year flashing.

  13. Use up or down button to change the year.

  14. Press and hold program to exit programming.