Programming the Timer

To enter the Program Mode:

1. Press and hold program for 2 seconds, and “PROG TMRS” displays.

2. After 5 seconds, “ENTER CODE” displays.

3. Enter code 1, 2, 3, and “PUSH TIMER BUTTON “TO SELECT FOR PROGRAMMING,” followed by “USE UP AND DOWN TO CHANGE SELECTED TIMERS,” scrolls through the display.

4. Press the desired timer button (1-15). (More than one can be programmed at one time).

5. Pressthe up or down button to change the selected timer settings.

6. Once timers are set, press and hold program, and new timer settings become active and normal operation is resumed.