Cleaning

NOTICE -

To avoid equipment damage, do not clean stainless steel with abrasive tools, abrasive cleaners or corrosive chemicals.

NOTICE -

To avoid component damage, do not use pressurized water or a steam cleaner to clean unit.

  1. Remove all power from the unit by unplugging the unit from the wall receptacle, or by turning off the wall circuit breaker.

  2. Allow unit to cool before cleaning.

  3. Remove rear doors and open front glass.

  4. Remove pans, pan supports, and water pan and clean with soap and water at sink.

  5. Clean all surfaces with a soft cloth, soap, and water.

  6. Clean around electrical controls and components with a damp cloth.

  7. Clean doors and glass with a non-streaking liquid glass cleaner.

  8. Leave doors open until ready to load and use again.

Cleaning Non-Glare Glass. Use a soft cloth, or sponge, and a non-abrasive cleaner and water. Dishwashing liquid or similar product works well. When cleaning the inside of cases, it is recommended the doors be completely open and covered to prevent splashing onto the glass, and ruining the glass coating.