Programming the Temperature

1. Turn power switch off.

   

2. While holding the “P” button on the control turn the power switch on.

   

3. The pass code for the control is 1-2-3-4.

   • Use the up and down arrows to change the character

   • Use the “P” button to move to the next character

   • Press the “P” button once again after the last character is entered

   

4. Once the pass code is accepted use the “P” button to find the temperature setting for the desired shelf.

   • The light will turn on for the desired shelf and the temperature will be shown on the display.

   • Cycle to each desired shelf and change the temperatures accordingly.

5. Once all of the temperatures are set turn the power switch off and then on again. The temperatures will be locked in at that point.