Unpacking

The Henny Penny Multipurpose Holding Cabinet has been tested, inspected, and expertly packed to ensure arrival at its destination in the best possible condition. The cabinet rests on cardboard pads that sit on a wooden skid. The unit is then packed inside a heavy cardboard carton with sufficient padding to withstand normal shipping treatment.

NOTICE -

Any shipping damage should be noted in the presence of the delivery agent and signed prior to his or her departure.

Heavy Object Take care when moving the unit to prevent personal injury. The units weigh approximately 25 lbs (11 kg)45 lbs (11 kg).

To remove the unit from the carton, you should:

1. Carefully cut banding straps.

2. Lift carton off the unit.

3. Lift the unit from the cardboard pads and skid.

4. Open drawers and remove the packing or literature that is inside.

5. Pull off any protective covering from the exterior of the cabinet.

6. The unit should be placed on a supportive structure or shelf so the entire bottom of the unit is evenly supported, and also, where the pans can be removed without interruption and easy loading and unloading of product. For proper operation, the cabinet must be level.

7. Access to the controls are on the side of the unit. Do not block the controls where they are not visible or which prevents easy access by a service technician. These controls do not need to be accessed for normal operation.

You are now ready to make the electrical connections to the unit.