Operating and Programming

Operating

Due to lower thermostat temperature setting, this unit has been designed to hold NON-TIME/TEMPERATURE CONTROL FOR SAFETY FOOD ONLY. This unit will NOT hold time/temperature control for safety foods.

  1. Turn power switch to the ON position.

  2. After a sequence of codes the display shows the time of day, or “ON”.

Press and hold the TEMP button to view the actual temperature of the unit.

Temperature Setpoint Programming

  1. Press and hold the TEMP button for 6 seconds. The actual temperature shows first followed by the flashing setpoint temperature.

  2. While holding in on the TEMP button, press and release the SET button. Now the setpoint temperature blinks at a faster rate. Now release the TEMP button.

  3. Press the UP and DOWN buttons to change the setpoint temperature.

  4. Once the desired setpoint temperature (preprogrammed maximum temperature) is reached, press the SET button to return to normal operation mode and the setpoint is saved.

"Time of Day" Programming

Press and hold the SET button while using the UP and DO buttons to set the desired time. When the SET button is re leased, the time is saved.