Start-up

1. Move all switches and controls on the cabinet to the OFF position.

2. Turn on power supply for the cabinet at the main circuit breaker.

3. Place pans into the water pan insert.

4. Install and close the doors.

5. Turn the power switch to the ON position.

6. Turn the light switch to the ON position.

7. Turn the radiant heat switch to the desired setting. We recommend stating at 6 for the lower radiant. If you have upper radiant, start at 4. These settings are adjustable and may change as you become familiar with the food product in Step 3 this unit.

8. Turn the water control switch to automatic.

9. After approximately 1 minute, turn the water thermostat to the desired setting. We recommend about 3.5 to 4 or a water temperature of 150ºF (66ºC).

NOTICE -

Prior to use, thoroughly clean unit as described in Operator's Manual.