Water Requirements

The automatic water system has a 1/4 inch compression fitting for CONNECTION copper tubing. Hot water would be preferred. We recommend using the automatic water system as this will allow the unit to maintain a more even water temperature and help ensure that the unit never runs dry of water. A straight-through bulkhead fitting is furnished with the unit for 1/4 inch copper tubing to protect the water line where it passes through the sheet metal. Reinstall the end panel.

This unit as manufactured requires the installation of an appropriate back-siphoning device (as per National Plumbing Code ASA-A40:8-1955) to be connected to the water inlet line. This device to be connected in accordance with basic plumbing code of the Building Officials and Code Administrators Interna tional, Inc. (BOCA), and the Food Service Sanitation Manual of the Food and Drug Administration (FDA). Install a water shut-off valve in a convenient location.

This appliance is intended to be permanently connected to the water mains and not connected by a hose set:

• Max. inlet water pressure: 1.2MPA

• Min. inlet water pressure, if necessary: 0.15MPA