Clock Set

  1. Press and hold the Program button for 5 seconds until “LEVEL 2” “SP PROG" “ENTER CODE” shows in the display.

  2. Press the program button  again and “CLK SET” “ENTER CODE” flashes in the left display.

  3. Enter code 1, 2, 3.

  4. “CS-1 ENTER DATE MM-DD-YY” flashes in the left display. Use the product button to set the date in the right display.

  5. Press the right arrow button and “CS-2 ENTER TIME” flashes in the left display and the time flashes in the right display. Press the up and down arrow buttons, or product buttons, to change the time.

  6. Press the right arrow button and “CS-2 ENTER TIME” flashes in the left display and “AM” or “PM” flashes in the right display. Use the up and down arrow buttons to choose “AM” or “PM”.

  7. Press the right arrow button and “CS-3 TIME FORMAT” flashes in the left display and “12-HR” or 24-HR” shows in the right display. Use the up and down arrow buttons to choose a 12-hour time format or a 24-hour time format.

  8. Press the right arrow button and “CS-4 DAYLIGHT SAVING TIME” flashes in the left display. Use the up and down arrow buttons to choose daylight saving time for your area: 1.OFF; 2.US (2007 & after); 3.EURO; or 4.FSA (US before 2007).

  9. Press and hold the program button  to exit.