Oil Top Off

Oil Guardian™ (Auto Top-Off)

During normal operation, the control automatically monitors vat oil level. If the control senses oil level is too low, unit automatically pumps oil from JIB into vat to keep oil at the proper level.

Manual Top-Off

If oil level is a little low, oil can be added to vat at any time from JIB to raise oil level to the proper level by following steps below. This procedure is NOT to be used to fill an empty vat.

  1. Press and hold filter button  (full vat- either one) until “*FILTER MENU*” followed by “1.EXPRESS FILTER” displays.

  2. Press the right arrow button 5 times until “6.FILL FORM JIB” displays.

  3. Press “✓” button, “FILL VAT” “✓=PUMP” “X=DONE” displays.

  4. Press and hold “✓” button, “FILLING” displays and oil is pumped from the JIB to the vat.

  5. Once vat is full, release “✓” button, “FILL VAT” “✓=PUMP” “X=DONE” displays. Press “X” button twice for normal operation.