Operating Components

This LED lights when the control calls for heat for the left vat.

During normal operation, press this button to start and stop cook cycles for the left basket; press to change displayed product; also used for “✓” to indicate yes or to confirm.

During normal operation, press this button to start and stop cook cycles for the left basket; press to change displayed product; also used for “X” to indicate no or cancel.

Shows the product codes; shows the timer countdown during cook cycles; shows the selections in the program mode; shows the temperature of the oil by pressing the info button; shows error codes (also displays in several languages).

Press once to view actual oil temperature; press twice to view oil set-point temperature; press three times to view recovery information for each vat from 250°F to 300°F (121°C to 149°C). Used in programming modes; used as button to back up to a previous parameter in program and filter modes.

Used to access the filter menu; also used for the up and down arrow buttons; press once to view the number of cook cycles before next filter in Global Filter or the mode percentage of filter allowance in Mixed Filter; press twice to view the time and date of the most recent filter on each vat; press three times to view the number of hours of use of the filter pad presently in the filter pan.

Used to access the program modes; used as the right arrow button to advance to the next parameters in program and filter mdoes; press to select 2nd language and

volumes

This LED lights when the control calls for heat for the right vat.

Press to turn on and off the heat system for the left vat(s); on full vats either heat button can be used.

Each product button LED lights when that particular product has been selected, or when it is compatible with cook temperature.

Press to select the desired product; press to place the letters under the button during naming a product in program

mode. The 0 product button can be used to start an idle mode if enabled in special program mode.

During normal operation, press this button to start and stop cook cycles for the right basket; press to change dis- played product; also used for “✓” to indicate yes or to confirm.

During normal operation, press this button to start and stop cook cycles for the right basket; press to change displayed product; also used for “X” to indicate no or cancel.

Press to turn on and off the heat system for the right vat (s); on full vats either heat button can be used.

A Filter Beacon® is found beside each black drain knob; when lit blue, indicates the oil should be filtered at this time; beacon flashes when the drain needs opened or closed.

When the power switch is turned to the on position, power is supplied to the controls and pumps.

Oil is drained into this pan and then is pumped through filters to help prolong the use of the oil.

Pull out on black knobs to open drain valve and oil drains from vat; puush in to close drain valve and oil can be pumped into vat.

The baskets hang on this when not in use, or to drain the product after a cook cycle.