JIB Maintenance

Replacing The JIB

Control displays “JIB IS LOW” and an alarm sounds.

  1. Open right door, pull JIB from unit, and pull cap from JIB top.

  2. Discard empty JIB, and replace with full one.

Model EEG 141 Oil Reservoir

Filling Oil Reservoir

Control displays “JIB IS LOW” and an alarm sounds.

  1. Open door and pull reservoir forward and remove reservoir cover.

  2. Place reservoir cover on bracket on door.

  3. Pour oil into reservoir up to fill lines and then replace cover and push reservoir back into position.

Removing/Cleaning Reservoir

  1. Open door and pull reservoir forward.

  2. Slide reservoir to the left and lift from fryer.

  3. Clean reservoir at a sink with soap and water.

NOTE: Before placing the reservoir back into position, lubricate the O-rings on the filter tube with cold oil. Check O-rings for tears or nicks and replace if necessary. To replace O-ring, use a small, flat-bladed screwdriver, pry upon the O-ring and pull off of end of tube.