Information Mode

The E-Log section provides an error code log.

1. Press the info button  and program button  at the same time and “*INFO MODE*” shows in the display, followed by “1. E-LOG”.

   NOTE: Press the info button  and program button  to exit Information Mode at any time.

2. Press the down arrow button and “A. (date & time) *NOW* show in displays. This is the present date and time.

3. Press the down arrow button and if an error was recorded, “B. (date, time, and error code information)” displays. This is the latest error code that the controls recorded. Sometimes the characters “L:” and “R:” appear in front of the error code on the display which refers to the left or right vat of a split vat.

4. Press the down arrow button and the next latest error code information can be seen. Up to 10 error codes (B to K) can be stored in the E-LOG section.

The Last Load section provides information on recent cook cycles.

1. Press the right arrow button and “2. LAST LOAD” shows in displays.

2. Press timer button 1  or 2  for the product you want to view the cook data and the LED flashes.

3. Press the down arrow button to start viewing the cook data.For example, if the left timer 1 LED  is flashing, “PRODUCT FRY L1” displays.If the right timer 2 LED  is flashing, “PRODUCT FRY R2” displays.

4. Press the down arrow button to start viewing the cook data.

Function	Display Example
Product (Last Product Cooked)	PRODUCT	FRY L1
Time Of Day The Last Cook Cycle Was Started	STARTED	FEB-04 2:25P
Actual Elapsed Cook Time	ACTUAL TIME	1:06
Programmed Cook Time	PROG TIME	1:00
Max Temp During Cook Cycle	MAX TEMP	350°F
Min Temp During Cook Cycle	MIN TEMP	313°F
Avg Temp During Cook Cycle	AVG TEMP	322°F
Heat On (%) During Cook Cycle	HEAT ON	45%
Ready? (Was Fryer Ready Before Start?)	READY?	YES
When Cook Cycle Was Stopped: Early After Complete Cook Cycle	QUIT AT *DONE*	0:10 REM +6 SEC
Difference (%) Between Actual And Pro- grammed Cook Time	ACT/PROG	1%

The Daily Stats section provides operational information of the fryer for the last 7 days.

1. Press the right arrow button and ”3. DAILY STATS” shows in displays.

2. Press the down arrow button to start viewing the cook data.

3. Press product button 1  to view data for other days of the week.

Function	Display Example
Day for which this data was recorded	APR-30	TUE	- - - -
Number of Hours: Minutes the fryer was on	(L/R) ON HRS	TUE	3:45
Number of times filtered	(L/R) FILTERED	TUE	4
Number of times filter skipped	(L/R) SKIPPED	TUE	4
Number of times oil added	(L/R) ADD OIL	TUE	4
Number of times oil discarded	(L/R) DISPOSE	TUE	0
Oil temperature recovery time	(L/R) RECOVERY	TUE	1:45
Total number of cook cycles that day	(L/R) TOT CK	TUE	38
Number of cycles stopped before *DONE*	QUIT CK	TUE	2
Cook Cycles for Product #1	COOK -1-	TUE	17
Cook Cycles for Product #2	COOK -2-	TUE	9
Cook Cycles for Product #3	COOK -3-	TUE	5
Cook Cycles for Product #4	COOK -4-	TUE	0
Cook Cycles for Product #5	COOK -5-	TUE	0
Cook Cycles for Product #6	COOK -6-	TUE	6
Cook Cycles for Product #7	COOK -7-	TUE	0
Cook Cycles for Product #8	COOK -8-	TUE	0
Cook Cycles for Product #9	COOK -9-	TUE	1
Cook Cycles for Product #0	COOK -0-	TUE	0

The Oil Stats section provides information of current oil and average of last four batches of oil.

1. Press the right arrow button and “4. OIL STATS” shows in displays.

2. Press the down arrow button to start viewing the cook data.

   Function	Display Example
   Start date of new oil	(L/R) NEW OIL	MAR-23
   Number of days oil in use	(L/R) OIL USE	4 DAYS
   Number of filters on this oil	(L/R) FILTERED	4
   Number of times filter skipped	(L/R) SKIPPED	0
   Number of cook cycles on this oil	(L/R) TOT CK	38
   Average number of days per oil change	(L/R) AVG DAYS PER OIL CHANGE	13.8 DAYS
   Average number cook cycles per oil change	(L/R) AVG CKS PER OIL CHANGE	388 CKS

3. Press and hold a product button (1 to 4) to view the data for the Average number of days per oil change and the Average number of cook cycles per oil change from one of the previous 4 batches of oil used.

4. Press product button 1  to view oldest oil data: Ex: OIL-4 14 DAYS

5. Press product button 2  to view 3rd oldest oil data: Ex: OIL-3 12 DAYS

6. Press product button 3  to view 2nd oldest oil data: Ex: OIL-2 15 DAYS

7. Press product button 4  to view previous batch of oil: Ex: OIL-1 13 DAYS

The Review Usage section provides accumulated info since the data was last reset.

1. Press the right arrow button and “5. REVIEW USAGE” shows in displays.

2. Press the down arrow button to start viewing the cook data.

Function	Display Example
Day the usage data was previously reset	SINCE	APR-23 3:00P
Number of Hours the fryer was on	(L/R) ON HRS	4
Number of times filtered	(L/R) FILTERED	4
Number of times filter skipped	(L/R) SKIPPED	0
Number of times oil added	(L/R) ADD OIL	4
Number of times oil discarded	(L/R) DISPOSE	1
Total number of cook cycles	(L/R) TOT CK	38
Number of cycles stopped before *DONE*	QUIT CK	2
Cook Cycles for Product #1	COOK -1-	17
Cook Cycles for Product #2	COOK -2-	9
Cook Cycles for Product #3	COOK -3-	5
Cook Cycles for Product #4	COOK -4-	0
Cook Cycles for Product #5	COOK -5-	0
Cook Cycles for Product #6	COOK -6-	6
Cook Cycles for Product #7	COOK -7-	0
Cook Cycles for Product #8	COOK -8-	0
Cook Cycles for Product #9	COOK -9-	1
Cook Cycles for Product #0	COOK -0-	0
Reset usage data: Enter the Usage Code - 1, 2, 3 on this step to zero out all the usage information	RESET USAGE / ENTER CODE	- - - - -

1. Press the down arrow button and “REPORTS/(type of report) PRINT” displays. This will print the type of report chosen. To select a report, press “✓”.

2. Press the down arrow button and “READ SP FROM USB” displays. This will upload the product set points from a specific file on the USB stick. To select set points, press the “✓”.

3. Press the down arrow button and “REMOVE USB?” displays. This will indicate when it is safe to remove the USB stick.

4. Press the down arrow button and display will show “SAVE SP TO USB”. This will download the product set points from memory and save them to the USB stick.