Setup Mode

Upon initial start-up, the controls will ask to confirm the settings for the fryer.

  1. When main power switch is turned on, “OFF” shows in both displays. Press the heat button on either side and *SETUP* *ENTER CODE* displays.

  2. Press product buttons 1, 2, 3, and “LANGUAGE” displays on the left , “ENGLISH” displays on the right.

  3. Use the up or down arrow buttons to change the operation display to: Greek “EΛΛHNIKA”, Russian “РУССКИИ”, Swedish “SVENSKA”, German “DEUTSCHE”, Portuguese “PORTUG.”, Spanish “ESPANOL”, or French “FRANCAIS”.

  4. Press the right arrow button to continue with the other set-up items which include:

    Menu Step Description
    TEMP FORMAT °F or °C
    TIME FORMAT 12-HR or 24-HR
    ENTER TIME

    Time of day (use product buttons to change)
    ENTER TIME AM or PM
    DATE FORMAT MM-DD-YY or DD-MM-YY

    ENTER DATE

    Today’s date (use product buttons to change)
    DAYLIGHT SAVING TIME

    1.OFF; 2.US (2007 & after); 3.EURO; 4.FSA (US before 2007)
    FRYER TYPE ELEC or GAS
    VAT TYPE FULL OR SPLIT
    AUTOLIFT ENABLED? NO LIFT or YES LIFT

    BULK OIL SUPPLY

    YES or NO
    BULK OIL DISPOSE?

    YES or NO
    S/N

    Shows serial number of the unit or can be recorded (THIS SERIAL NUMBER SHOULD MATCH THE SERIAL NUMBER ON THE DATA PLATE, ON THE DOORS.)
    2nd LANGUAGE

    By setting a second language in the controls, 2 languages can now be easily chosen by pressing the program button  during normal operation. One language shows in left display and second language shows in right display. Pressing the √ button under desired language, selects that language seen in displays.
    2nd VOLUME By setting a second volume in the controls, 2 volumes can now be easily chosen by pressing the program button  twice during normal operation. One volume setting shows in left display (NONE to 10; 10 being the loudest) and a second volume shows in right display. To select volume, press √ button under desired volume.

    SETUP COMPLETE

    OFF displays and unit shuts down.

Unless otherwise indicated, the up and down arrow buttons change settings.

Setup mode can also be accessed by re-initializing the controls in Level 2 programming (SP-3) of the special program mode.