Changing the Filter Pad

(missing or bad snippet)(missing or bad snippet)

In order to assure good oil pumping performance, the filter pad (or paper) should be changed at least once per day. However, in stores open 24 hours a day, the pad should be changed twice a day.

NOTE: If filter pad has not been changed, a reminder shows on the display, “CHANGE PAD”. Press “✓” button to cancel the message, but it reappears every 4 minutes until the filter pad has been changed.

 

Filter Pan Stop

  1. Ensure the main power switch is in the on position.

  2. Open the door, lift-up on the filter pan stop and pull-out the filter pan assembly, using the handle on the filter pan.

  3. Lift the pan cover from the filter pan.

  4. Lift the crumb basket from the filter pan. Wipe the oil and crumbs from the crumb basket. Clean the crumb basket with soap and water, then thoroughly rinse with hot water.

  5. Remove the filter pad retaining ring and clean thoroughly with soap and water. Rinse thoroughly with hot water.

  6. Pull the filter pad from the pan and discard pad.

  7. Remove the bottom screen from pan and clean thoroughly with soap and water. Rinse thoroughly with hot water.

  8. Wipe the oil and crumbs from the filter pan. Clean the filter pan with soap and water, then thoroughly rinse with hot water.

  9. Thoroughly dry all filter pan components before reassembly.

  10. Reassemble in reverse order, placing the bottom screen into the filter pan first, followed by the filter pad, retaining ring and the crumb catcher.

    Filter Tube Connection

  11. Push the filter pan assembly back underneath the fryer, making sure the filter tube on the pan makes a good connection with the fitting underneath the fryer.

    Drain stop

  12. Ensure the filter pan stop is engaged and the fryer is now ready for normal operation.