Basic Operations

To stop a cook cycle at any time, press and hold timer button 1  or 2

The Evolution Elite fryer is available as non-auto-lift and auto-lift models. The auto-lift controls, allow the baskets to be automatically lowered into the shortening at the beginning of the cook cycle, and raised from the shortening at the end of the cycle.

  1. Once out of the Melt Cycle, LOW TEMP flashes until the setpoint temperature has been reached. Once the setpoint temperature has been reached, the product name now shows in the display, ex: FRY, and product now can be placed in the oil.

  2. Press timer button 1  or 2 .

  3. Display shows the name of the product cooking (ex: “FRY”) and the timer counting down.

  4. When cook cycle is complete, an alarm sounds and “DONE” displays.

  5. Press the timer button under “DONE” to stop the alarm, and lift basket from vat.

  6. If a Quality Timer (hold timer) has been programmed, the hold time starts automatically when the user presses the timer button to end the cook cycle. While the quality timer counts down, the three-digit product abbreviation followed by “Qn” displays, where “n” is the number of minutes remaining. ex: “FRY” / “Q5” / “FRY” / “Q5” / “FRY” / “Q4”, etc.

  7. At the end of the timer countdown, control beeps and “QUAL” followed by the three-digit product name: “QUAL” / “FRY” / “QUAL”/ “FRY” displays. Press the timer button to cancel the timer.