Do Not Disturb

Time periods of peak operations during which the “FILTER NOW?” message will not appear, may be programmed into the fryer. There are three groupings of days - Monday thru Friday (M-F), Saturday (SAT), and Sunday (SUN). Within each day grouping, up to 4 time periods (M-F 1 thru M-F 4, SAT 1 thru SAT 4, and SUN 1 thru SUN 4) may be programmed. A time period may be anywhere from 1 to 180 minutes in length.

  1. Press and hold the program button  for 5 seconds until “LEVEL 2” “SP PROG” “ENTER CODE” shows in the display.

  2. Press the program button  once more and “DO NOT DISTURB” “ENTER CODE” flash in the left display.

  3. Enter code 1, 2, 3.

  4. “DO NOT DISTURB ENABLED?” flashes in the left display and “YES” or “NO” appears in the right display. Press the up and down buttons to choose “YES” or “NO”.

  5. Press the program button  and “M-F 1” shows in the left display and the time flashes in the right display. Press the up and down arrow buttons, or product buttons, to change the time.

  6. Press the program button  and “M-F 1” shows in the left display and “A” or “P” flashes in the right display. Use the up and down arrow buttons to choose AM or PM.

  7. Press the program button  and “M-F 1” shows in the left display and far right character display flashes. Press the product buttons to enter amount of time (up to 180 minutes) during which filtering will be inhibited, after time entered in step 5.

  8. Press the program button  to move to the next timer period, M-F 2.

  9. Repeat steps 5, 6, 7, and 8 for all of the following time periods:

M-F 1 XX:XX A XX
M-F 2 XX:XX A XX
M-F 3 XX:XX A XX
M-F 4 XX:XX A XX
SAT 1 XX:XX A XX
SAT 2 XX:XX A XX
SAT 3 XX:XX A XX
SAT 4 XX:XX A XX
SUN 1 XX:XX A XX
SUN 2 XX:XX A XX
SUN 3 XX:XX A XX
SUN 4 XX:XX A XX