Using Quarter Size Baskets

Overview

This article provides step by step instructions on how to enable two additional timers per control for customers using narrow quarter sized baskets.

Refer to Operating Components for button locations.

Set up

NOTE: The following steps must be performed on each control where quarter sized baskets are used.

  1. Press and hold the program button for about 4 seconds until LEVEL 2 appears in the display followed by SP PROG.

  2. Using product buttons, enter the code 1, 2, 3.

  3. Use the Programming button to advance to step SP-14 NUMBER OF BASKETS.

  4. Press either Filter button to change from 2-BASKET to 4-BASKET.

  5. Press and hold the Programming button to exit.

Operating

The Left Timer 1 button and the Left Timer 2 button will now start separate timers in the left display and the Right Timer 1 button and the Right Timer 2 button will now start separate timers in the right display.

NOTE: Oil must be heated to set point temperature for timers to function.