Intended Use

To avoid property damage or injury, read the Operation Manual before installing, operating or servicing this equipment. Retain this manual in a convenient location for future reference.

To avoid severe burns, do not open the drain valve while vat is under pressure. Allow the pressure to reduce to atmospheric pressure.

Opening the vat's drain valve allows oil to flow out the bottom drain. To avoid burns, ensure a drain pan or shuttle is in place to catch the hot oil.

Burn Risk

To avoid burns, do not allow water to mix with the frying oil.

Burn Risk

To avoid burns, do not move the fryer while containing hot oil.

Do not overload, or place product with extreme misture content into the basket.

- 3 lbs. (1.4 kg.) is the maximum amount of product per full vat.

- 1 1/2 lbs. (.68 kg.) is the maximum amount of product per split vat.

Failure to follow these instructions can result in oil overflowing the vat which could cause serious burns, personal injury, fire and/or property damage.

This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with, clean or perform maintenance on the appliance.

To avoid personal injury, the appliances must be disconnected from their power supply during cleaning or maintenance.

To prevent equipment damage, food contamination, or personal injury, this appliance must never be cleaned with a water jet or steam cleaning tool.

• The maximum operating temperature for our fryers is 105°F (40.5°C).

• The maximum operating humidity of our fryers is 93%.

The unit is not intended for continuous mass production such as in a factory. During use, the airborne A-weighted emission sound pressure is below 70 db(A). This appliance is intended for commercial use in kitchens of restaurants, bakeries, hospitals, etc.

Always use strain relief. Install the provided power cord with the ground wire dimensioned to fail last in a way that if the strain relief fails, wires L1, L2, L3 and N must draw taunt and fail first. If the supplied power cord or an existing one becomes damaged, do not use it; rather, replace it with a known good power cord. The power cord must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. The unit requires a grounded receptacle with a separate electrical line protected by a fuse or circuit breaker of the proper rating.

Recommended maintenance must be performed to ensure safe and continuous operation of unit. See Henny Penny operation instructions.

Proper maintenance also increases the usable life of the appliance and oil, which reduces lifetime operating costs. Additionally, old oil increases the possibility of surge boiling and fire due to the reduced flash point of the oil. The oil temperature must never exceed 450⁰ F (230⁰ C).