Cleaning

The hand breader/sifter was designed to completely disassemble PROCEDURES for easy cleaning. For cleaning, proceed as follows:

NOTICE -

To avoid product damage, avoid water in the motor compartment.

1. Disconnect the electrical supply to the unit.

2. Remove breading lugs, back splash, dip pot, dip pot holder, dip basket, pan support, tray rack, sifter basket, basket bottom (removable from side walls), spring clip, basket holder, and unit top. These items can all be taken to a sink for a thorough cleaning. (See exploded view in Technical Manual for identification of parts.)

3. After brushing away all excess breading material from the sifter bin, the entire interior of the bin can be thoroughly cleaned with soap, water, and a soft sponge. Avoid excess water around motor compartment.

4. Clean the exterior of the unit in the same manner.