Changing the Display Settings

Changing the Dedicated Display from Breakfast to Lunch

This procedure is basically changing the product being cooked in a vat with a dedicated display.

Breakfast to Lunch 1.

  1. Press a product button, for ex: Product button 1.

    “<<<< >>>>” displays.

  2. Press and hold Timer button 1 or 2 for 5 seconds and then “FR FRIES” displays.

Lunch to Breakfast 1.

  1. Press a product button, for ex: Product button 3.

    “<<<< >>>>” displays.

  2. Press and hold Timer button 1 or 2 for 5 seconds and then “HASH BRN” displays.

During a cooking cycle, if an attempt is made and fails to change a product in a dedicated display or multi-product display, the setpoint temperatures of the products are not the same. Wait until the cook cycle is complete, and then perform the change procedure.

Changing from a Dedicated Display to a Multi-Product Display

This procedure is simple, and always works (will not be rejected) because it never tries to change the set-point temperature.

  1. Press and hold Timer button 1 or 2 for 5 seconds until control beeps.

  2. Release the timer button and “---- ----” displays, indicating the change has been made to the Multi-product Display Mode.

Only products programmed for this set-point temperature will be able to be selected for cooking.

Changing from a Multi-Product Display to a Dedicated Display

The display shows “---- ----” if in the Multi-Product Display Mode and can be changed to a dedicated display.

  1. Press a product button, for ex: Product button 1.

  2. If the setpoint of the vat matches the product, “FR FRIES” displays. If the setpoint of the vat doesn't match, “<<<< >>>>” displays.

  3. Press and hold Timer button 1 or 2 for 5 seconds until control beeps.

  4. Release the timer button and “FR FRIES” displays, indicating the change has been made to the Dedicated Display Mode.

Changing from A Multi-Product Display to a Multi-Product Display with Different Setpoint Temperatures

  1. Press a product button, for ex: Product button 1.

  2. If the setpoint of the vat matches the product, “FR FRIES” displays. If the setpoint of the vat doesn't match, “<<<< >>>>” displays.

  3. Press and hold Timer button 1 or 2 for 5 seconds until control beeps.

  4. Release the timer button and “FR FRIES” displays, indicating the change has been made to the Dedicated Display Mode.

  5. Press and hold Timer button 1 or 2 for 5 seconds until control beeps.

  6. Release the timer button and “---- ----” displays, indicating the change was made to the Multi-Product Display Mode.