JIB Maintenance

During normal operation, the control automatically monitors the oil level in the vat. If the control senses the oil level too low, the unit pumps oil from the JIB into the vat to keep the oil at the proper level.

Filling the JIB using the RTI System

JIB needs filled when “*CHECK* *JIB*” displays and amber light illuminates on the front of the fryer.

  1. Open the door that has the RTI switch.

  2. Press & hold the ADD side of the RTI switch to add oil to the JIB.

Replacing the JIB (for locations without RTI)

JIB needs replaced when “*CHECK* *JIB*” displays and amber light illuminates on the front of the fryer.

  1. Open right door and pull JIB from unit.

  2. Pull the cap from top of JIB.

  3. Discard empty JIB and replace with full one.

  4. Place cap on top of JIB.